Into the Driver's Seat

Temperature & Humidity monitor using Arduino NANO + DHT22 + 0.96 inch 128X64 I2C OLED WE were playing around a lot already with I2C-LCD displays <===> https://gustmees.wordpress.com/?s=i2c+lcd <===> but not yet with I2C-OLEDs. In this tutorial WE will create a <===> Temperature & Humidity monitor using Arduino NANO + DHT22 + 0.96 inch 128X64…

 

Learn more / En savoir plus / Mehr erfahren:

 

https://www.scoop.it/topic/21st-century-learning-and-teaching/?&tag=OLED

 

https://www.scoop.it/topic/21st-century-learning-and-teaching/?&tag=Gust-MEES

 

Via Gust MEES, NextLearning

BBC Micro:Bit board was first announced in July 2015. Designed for STEM education, the board was then offered to UK schools in March 2016, and a few months later UK store would start selling it worldwide. It’s now available pretty much anywhere, and you can likely find it in a local store or online.

The Thai government must have seen this, and thought to themselves “If the British can do it, we can do it too!”, as the National Electronics and Computer Technology Center (NECTEC) part of Thailand’s Ministry of Science and Technology designed KidBright32 board and courses to teach STEM to Thai students.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Coding

 

Via Gust MEES

Recently I bought myself the latest model of 3D-printers from Formlabs, the Form2.

The Form 2 delivers high-resolution prints in  Industrial 3D printing quality and it is very, very expensive. (I had been waiting (and saving money) for 3 years until I made the financial plunge to get such a machine)

But it has the huge advantage that dosen’t require a lot of tweaking and experimenting to run, you just take it out of the box, you install it and it runs !! It comes with the right software, the materials you need to use are in sich a packaging (1 Liter resin cartridges !) that you can concentrate on the objet you’re printing and not on the maintenance of the machine. The system recognises the resin type, configures settings, and allows you to keep track of resin supplies.

The Form 2 is a SLA printer where SLA stand for Stereolithography. SLA is an additive manufacturing – commonly referred to as 3D printing – technology that converts liquid materials into solid parts, layer by layer, by selectively curing them using a light source in a process called photopolymerization. SLA is widely used to create models, prototypes, patterns, and production parts for a range of industries from engineering and product design to manufacturing, dentistry, jewelry, model making, and education.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=3D-Printing

 

Via Gust MEES

Inside a makerspace at Indian Trace Elementary School in Broward County, Florida, some kids are sitting, working by themselves. A group of others stand together staring intently at something, talking, and moving their arms energetically. Students are doing without adult direction. There’s an overall sense of purpose that is visceral. The energy feels more like that of a trendy dot-com startup than an elementary school media center.

This environment is part of a larger maker movement that acknowledges 21st Century natives need to learn in settings that are very different than the musty libraries or classroom rows of their parents. Makerspaces are areas where students come to explore, build, create, and tinker. Students are learning without turning to the front of the room for directions or receiving steps from the teacher at the center. They are the ones directing the action. They use a variety of materials from paper and cardboard to Legos to high-tech robots. It’s a mixed bag of art supplies, erector sets, paper mache, 3-D printers, green screens, drones, and more. Each space has its own unique set-up and feel based on the needs, interests, resources and goals of the community.

Via John Evans

With this project you can change the path of the electric current to run through different sensors.  With this design you can switch between lighting a Blue LED or activating a Buzzer.  You also have the choice of using a Light Dependent Resistor with the LED or Buzzer.  You can be creative and design your own circuit and add different sensors (other LEDs...).  

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

Via Gust MEES, Madame Tournesol

Learning about basic electronics and creating your own projects is a lot easier than you may think.  In this tutorial, we’re going to give you a brief overview of common electronic components and explain what their functions are.  You will then learn about schematic diagrams and how they are used to design and build circuits.  And finally, you will put this information to use by creating your first basic circuit.

Via John Evans

ALA’s Teen Tech Week will be upon us before we know it (March 5-11).  To help get ready for this event, I’ve written a post for Demco Ideas with 5 makerspace project ideas to tie in with this year’s theme, “Be the Source of Change”.  It was hard to limit it to just five ideas, so each one has examples of several different variations on the project.

Via John Evans, Anny Gordon

Streaming. Gaming. Networking. Even printing! These projects prove the Raspberry Pi is far more than a toy. Here are 10 surprisingly useful projects anybody can do.

 

Learn more / En savoir plus / Mehr erfahren:

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?tag=Raspberry+Pi

 

Via Gust MEES

Writing a post like this isn’t easy.  I feel like I know in my heart what my philosophy on makerspaces is, but putting it into tangible statements seems harder.  So I started thinking about this more as a manifesto – if I was to make a grand statement about what I feel the value of makerspaces in schools are, what would it be?  To me, what are the most important values of makerspaces?

Via John Evans

Learn to design, create, and program electronics
11,116 open-source project tutorials shared by 408,637 developers

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/?s=maker

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

Via Gust MEES, Yashy Tohsaku, Jim Lerman

Interfacing LCD to Arduino - Tutorial on how to interface arduino to lcd screen (16x2 lcd, 20x4 lcd) with arduino code/program, lcd pin diagram and circuit.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=makerspace

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=ARDUINO

 

Via Gust MEES

BEAUTIFUL AND CLEVER

The Monarch flashes its LEDs when its antennae touch. But it's also clever! It uses a clock source and shift register in a particular configuration in order to generate its patterns. Through it, one can learn about the basics of digital design, clocking, and randomness.

It is a third in a series of electronic 'bugs', the first is The Lady and the second is The Gent.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://www.youtube.com/watch?v=sIKmmhdMFSE&feature=youtu.be

 

https://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=electronics

 

Via Gust MEES, Mika Auramo

Makerspace Materials & Products. Great Idea Starters and a FREE Supply List. Perfect For Makerspaces or a MakerEd Program at Your School or Library.

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

https://gustmees.wordpress.com/2017/02/09/9553/

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?&tag=Ideas+for+makerspaces

 

Via Gust MEES

Via John Evans

WHERE to buy the electronics stuff!? I am getting very often asked from persons WHO follow my curation (ideas for makerspaces) and my blog posts WHERE they can buy the necessary proposed stuff. Please find below a non-exhaustive list: List of online Electronics shops (mostly for Europe, but some are delivering ALSO global)

 

Learn more / En savoir plus / Mehr erfahren:

 

https://gustmees.wordpress.com/2014/08/20/maker-space-a-new-trend-in-education-and-a-big-responsibility/

 

http://www.scoop.it/t/21st-century-learning-and-teaching/?tag=Ideas+for+makerspaces

 

Via Gust MEES

https://www.animaker.com/infographics Animaker presents you the first ever Animated Infographics video maker. You can now create amazing infographic videos
Via Maggie Rouman